ATG KO Sensor

Features:
-Dual function: motion sensor + photocell
-Keyboard setting
-High Sensitivity for Occupancy Detecting
-Easy Knock-out install
-More penetration and sensitivity, bigger covered area with Microwave technology

Product Details

ATG KO sensor is a dual function sensor with both occupancy and photocell function.
It has advanced setting keyboard that allows you to set the size of occupancy area, photocell trigger brightness and hold time.
The KO sensor is installed through the standard 1/2 and 3/4 luminaire knock-out, making it widely applicable for both indoor and outdoor luminaires.


Technical Specifications:
Dimension: 74*94.3*33 mm (2.91*3.71*1.30 inch)
Detection range: Max. ( ø x H): 18m x 10m
Detection angle: 30°~150°
Mounting height: Max.10m


IP rating: IP20 IP65 (mounting in iBright™ special box)
Operating Temperature: -20℃~ +60℃


Operating Voltage: 120-277VAC
Switched power: Max. 800W (capacitive)   Max. 1600W (resistive)
Standby power: 0.5W
Detection area: 10/25/50/75/100%, can be customized
Hold time: 10s/30s/90s/6min/20min/30min, can be customized
Daylight threshold: 5lux/10lux/30lux/50lux/Disable
Sensor principle: Microwave motion detector
Microwave frequency: 5.8GHz+/-15MHz
Microwave power:<1mw

  Document Library
  Spec Sheet
  IES Files
  Installation Guide
  LM79 Report
  ATG catalog
Photo Gallery
Quality Warranty

10700 7th Street  Rancho Cucamonga, CA 91730      Toll free: 877-461-5333      Fax: 951-245-7770
Copyright © 2013-2014 ATG Electronics  All rights reserved