|
Direct Assembly on DIN-Rail.
Enclosed and compact housing, weather resistant.
Overload protection, constant current limiting.
Short-circuit proof, 100% full load burn-in test.
Built-in EMI filter, low ripple noise.
Plug is available for North America, Europe etc.
Simple primary hook-ups, class 2 outputs.
No minimum load, no load balancing and no dip switches.
Proven reliability at low cost.
|
|
| QDriver™ 18W LED Power Supply |
ATG Electronics® QDriver™ 18W LED Power Supply is a universal device that operates on input voltage ranging from 90VAC-250VAC, and provides 1.5A amperes of filtered and regulated 12VDC power (nominal) to LED lighting fixtures, controllers or decoders etc.
QDriver™ 18W comes with a 1.5 meter (4.92 feet) long power cord with American plug or European plug to suit different interface. It also has a 1.5 meter (4.92 feet) long cable, which can directly attach to ATG Electronics products or via power adaptor board.
QDriver™ 18W is contained in a compact plastic housing and rated as IP67 degree (applicable for dry, wet and damp environment). The slim profile makes it suitable for most confined spaces; and mounting brackets at both ends of the power supply can enable customers to install it easily.
QDriver™ 18W is the ideal and cost effective solution for driving a small quantity of 12VDC LED lighting fixtures, controllers or decoders etc. It has successfully been installed with thousands of LED lighting systems in the world. |
| Technical Specifications: |
|
Input Voltage: 90 VAC~250 VAC
Output Voltage: 12 VDC
IP rating (Work environment): IP 67 (applicable for dry, wet, damp environment)
Dimension: L203 * W27 * H26 mm (L8 * W1.06 * H1.02 inch)
|
| HPS-12018-Z00000-AM |
|
| HPS-12018-Z00000-EU |
|
|
