|
Direct Assembly on DIN-Rail.
Enclosed and compact housing, weather resistant.
Overload protection, constant current limiting.
Short-circuit proof, 100% full load burn-in test.
Built-in EMI filter, low ripple noise.
Plug is available for North America, Europe etc.
Simple primary hook-ups, class 2 outputs.
No minimum load, no load balancing and no dip switches.
Proven reliability at low cost.
|
|
| QDriver™30W LED Power Supply |
|
ATG Electronics® QDriver™ 30W LED Power Supply is a universal device that operates on input voltage ranging from 90VAC-240VAC, and provides 2.5A amperes of filtered and regulated 12VDC power (nominal) to LED lighting fixtures, controllers or decoders etc.
QDriver™ 30W comes with a 1.5 meter (4.92 feet) long power cord with American plug or European plug to suit different interface. It also has a 1.5 meter (4.92 feet) long cable, which can directly attach to ATG Electronics products or via power adaptor board.
QDriver™ 30W is contained in a compact plastic housing and rated as IP68 degree (applicable for dry, wet, and damp environment, submersible for underwater installation). The mounting brackets at both ends of the power supply can enable customers to install it easily.
QDriver™ 30W is the ideal and cost effective solution for driving a small quantity of 12VDC LED lighting fixtures, controllers or decoders etc. It has successfully been installed with thousands of LED lighting systems in the world.
|
| Technical Specifications: |
|
Input Voltage: 90VAC~240VAC
Output Voltage: 12 VDC
IP rating (Work environment): IP 68 (submersible)
Dimension: L142 * W71* H44 mm ( L5.6 * W2.8 * H1.7 inch)
|
| HPS-12030-Z00000-AM |
|
| HPS-12030-Z00000-EU |
|
|
