|
Direct Assembly on DIN-Rail.
Enclosed and compact housing.
Overload protection, constant current limiting.
Short-circuit proof, 100% full load burn-in test.
Built-in EMI filter, low ripple noise.
Plug is available for North America, Europe etc.
Simple primary hook-ups, class 2 outputs.
No minimum load, no load balancing and no dip switches.
Proven reliability at low cost.
|
|
|
ATG Electronics® QDriver™ 60W LED Power Supply is a universal device that operates on input voltage ranging from 85 VAC~264VAC, and provides 5 amperes of filtered and regulated 12VDC power (nominal) or 2.5 amperes of 24VDC power (nominal) to LED lighting fixtures, controllers or decoders etc.
QDriver™ 60W comes with a 1.5 meter (4.92 feet) long power cord with American plug or European plug to suit different interface. It also has a 1.5 meter (4.92 feet) long cable, which can directly attach to ATG Electronics products or via power adaptor board.
QDriver™ 60W is contained in a compact plastic housing and applicable for dry environment.
QDriver™ 60W is the ideal and cost effective solution for driving a small quantity of 12VDC LED lighting fixtures, controllers or decoders etc. It has successfully been installed with thousands of LED lighting systems in the world.
|
| Technical Specifications: |
|
Input Voltage: 85 VAC~264 VAC
Output Voltage: 12 VDC or 24 VDC
Dimension: L120*W60*H40mm (L4.7*W2.4*H1.6 inch)
|
| HPS-12060-000000-H0 |
|
| HPS-24060-000000-H0 |
|
|
