Direct Assembly on DIN-Rail.
Enclosed and compact housing, weather resistant.
Overload Protection, Constant Current Limiting, Reset: Auto Recovery.
Short-Circuit Proof, 100% Full Load Burn-in Test.
Built-in EMI Filter, Low Ripple Noise.
Plug is available for North America, Europe etc.
Simple primary hook-ups, Class 2 outputs.
No minimum load, no load balancing and no dip switches.
Proven reliability at low cost.

Order Procedure
Delivery Time
Payment Instruction
Shipping Options

Project solutions available as per requests.
Order samples online!

ATG Electronics® XDriver™ Waterproof 150W LED Power Supply is a universal device that operates on input voltage ranging from 90VAC~130VAC and 170VAC~250VAC and provides 12.5 amperes of filtered and regulated 12VDC power (nominal) to LED lighting fixtures, controllers or decoders etc.
XDriver™ Waterproof 150W comes with a 1 meter (3. 3 feet) long power cord with American plug or European plug to suit different interface. It also has a 1 meter (3. 3 feet) long cable, which can directly attach to ATG Electronics products or via power adaptor board.
XDriver™ Waterproof 150W is contained in aluminum housing and rated as IP66 degree (applicable for dry, wet and damp environment). The mounting brackets at both ends of the power supply can enable customers to install it easily.
XDriver™ Waterproof 150W is the ideal and cost effective solution for driving quantity of 12VDC LED lighting fixtures, controllers or decoders etc. It has successfully been installed with thousands of LED lighting systems in the world.

Input Voltage: 90VAC~130VAC/170 VAC~250 VAC
Output Voltage: 12 VDC/24VDC
Dimension: L235 * W126.5 * H58 mm (L9.25 * W4.98 * H2.28 inch)