ATG Electronics® QDriver™ 60W LED Power Supply is a universal device that operates on input voltage ranging from 85 VAC~264VAC, and provides 5 amperes of filtered and regulated 12VDC power (nominal) or 2.5 amperes of 24VDC power (nominal) to LED lighting fixtures, controllers or decoders etc.

QDriver™ 60W comes with a 1.5 meter (4.92 feet) long power cord with American plug or European plug to suit different interface. It also has a 1.5 meter (4.92 feet) long cable, which can directly attach to ATG Electronics products or via power adaptor board.

QDriver™ 60W is contained in a compact plastic housing and applicable for dry environment.

QDriver™ 60W is the ideal and cost effective solution for driving a small quantity of 12VDC or 24VDC LED lighting fixtures, controllers or decoders etc. It has successfully been installed with thousands of LED lighting systems in the world.

 

Features
Direct Assembly on DIN-Rail.
Enclosed and compact housing.
Overload protection, constant current limiting.
Short-circuit proof, 100% full load burn-in test.
Built-in EMI filter, low ripple noise.


Plug is available for North America, Europe etc.
Simple primary hook-ups, class 2 outputs.
No minimum load, no load balancing and no dip switches.
Proven reliability at low cost.
Part Numbers
Technical Specifications
Close Window