| Part Numbers: |
HFS-B024R-036400-L1 |
 |
NOTE:
This user guide is to explain the steps necessary to use the specified and assure peak performance. Its intended use is for reference only, by a fully qualified electrician or technician. This document should never be considered a substitute for any provision of a regulation or state and/or local code.
Please read this entire manual to fully understand and safely use this product.
Specifications are subject to change without notice. Please visit www.atgelectronics.com for most recent user guide versions.
GETTING STARTED
ATG Electronics® iSignage™ B24 LED Flex Strip is a slim and ultra flexible device designed especially for signage lighting, motorcycle decoration and cove lighting.
iSignage™ B24 adopts high intensity LEDs to operate at 12VDC (safe to humans). It can be joined together via 2-pin power cable, and cut at every 3LEDs; iSignage™ B24 can also be dimmed with specified dimmer (Qcolor™ Remote Dimmer).
iSignage™ B24 can be easily installed onto any surface with 3M tape on the back, the slim and ultra flexible profile makes it easy to fit different space. Rainproof treatment is available when it is used for motorcycle decoration.
Power Supplies are available in normal and waterproof versions for indoor and outdoor applications. One meter (3.3 feet) 2-pin power cable can be provided for cases there is big space between power supply and channel letters.
iSignage™ B24 has been successfully installed to light up thousands of channel letters and motorcycles worldwide; besides it can also be used for cove lighting.
This guide contains important information about installing and operating your new iSignage™ B24 LED Flex Strip safely and accurately.
Included in this Box
iSignage™ B24 LED Flex Strip, 20 PCs
User Guide, 1 Set
Power Connector(s)
Additional Items Needed
Power Supply: 12 VDC QDriver™/XDriver™ LED Power Supply
Control System: QColor™ Remote Dimmer (HCD-00001-000000-RD)
Unpacking
1) Unpack and carefully examine the product.
2) Report any damage and save all packing materials if any part is damaged during transport.
3) Do not attempt to use this apparatus if it is damaged.
Warnings
1) Risk of electric shock. Ensure that the power supply is off when wiring or soldering the sections of the strip.
2) The LED flex strip and power supply must be installed by a qualified electrician or technician in accordance with relevant local codes.
Cautions
1) Suggested continuous working time is around 8 hours, never more than 12 hours.
2) Do not use the LED flex strip in close environment.
3) Do not use sharp tools near or on the surface of the LED flex strip.
User Responsibilities
It is the responsibility of the contractor, installer, purchaser, owner, and user to install, maintain, and operate the strip in such a manner as to comply with all state and local laws, ordinances, and regulations.
Note:
The instructions and precautions set forth in this user guide are not necessarily all-inclusive, all conceivable, or relevant to all applications as ATG Electronics cannot anticipate all conceivable or unique situations.
PLANNING THE INSTALLATION
The LED flex strip installation requires planning to ensure timely, successful installation with minimal complications and down time.
Planning Suggestions
Consult an Electrical Inspector to review all wiring plans.
Create a Layout Plan drawing, per a Lighting Designer¡¯s or Architect¡¯s recommendation.
Consult ATG Application Engineering Services as needed.
Installation Considerations
When creating your installation plan, consider the following:
1) Location of the LED flex strip
The LED flex strip is non-waterproof which is suitable for dry environment.
2) 2) Minimum bending diameter
NEVER less than 5 cm (1.97 inch).
3) Minimum cutting unit
The minimum working unit is 3LEDs. So cut every 3LEDs at cutting marks.
4) Maximum series-wound quantity
25 pcs.
Installation Steps
1) Remove the 3M tape from the back of the LED flex strip;
2) Place and fix the LED flex strips to the defined area according to project layout;
3) Connect the LED flex strips together with power cables;
4) Connect the LED flex strip to the power adapter board with power connector;
5) Connect the power supply with power adapter board;
6) Plug power supply into power outlet to light the whole system.
Wiring Diagram
iSignage™ B24 LED Flex Strip Specifications
Operation Voltage: 12 VDC
Color: red, yellow, blue, green, white
LED Qty: 24 LEDs
Lumens: 21.12 lm (red), 20.64 lm (yellow), 24.96 lm (blue), 88.8 lm (green), 84 lm (white)
Power Consumption: 1.8 W
Beam Angle: 80 degree
Dimension: L360*W12*H0.8 mm (L14*W0.47*H0.03 inch)
Work environment: applicable for dry environment
* Detailed specifications please refer to the product catalog of iSignage™ B24 LED Flex Strip.
LED SOURCE LIFE
Traditionally, the definition of life for light sources is defined at the point which 50% of the lamps fail under specified conditions. However, all necessary components in a LED lighting system will determine useful life time. According to the industry standard, ATG Electronics uses the concept of useful light output and rates product life time at standard of ¡°less than 50% lumen maintenance of original light output¡±.
LED exhibits very long operational life time, typically 50,000 hours or more. However, like all light source, LED light output can degrades and also undergo gradual shifts in color over time.
LED chips, performed lighting effects and working environmental conditions, such as temperature, humidity, and ventilation will affect LED lumen maintenance. The overall LED Lighting System life time could vary substantially based on usage and environmental condition.
ATG Electronics always adopts brand chips and high quality materials and components to make LED Lighting Systems.
QUALITY WARRANTY
This product is sold pursuant to ATG Electronics Standard Terms and Conditions which can be found at www.atgelectronics.com and which contain important provi-sions, including, among others, Quality Warranty, exclusions and limitations on ATG Electronics liability for damages, and restrictions on the remedies that are available to you.
